Preparing the Headset
Underneath the base of the headset:
- Set configuration switch to position “A” (Diagram: 12)
- Set both volume controls to position “2” (Diagram 10, 11)
On the rear of the headset:
- Set both switches on the rear to LEFT position (Diagram: 5, 9)
Connecting Components
- Connect the SNOM 4 Pin > RJ12 cable from the back of the phone to the RJ12 port on the Adapter
- Connect the 3.5MM Audio Cable from the Adapter to the Headset Base (Diagram: 7)
- Connect the RJ11 cable from the HEADSET port of the phone to the Headset Base (Diagram: 8). This cable can be found in the headset box.